Building a new home is an exciting journey, but it requires careful monitoring to ensure quality and compliance. Kamran Basiri from iSPECT Building Inspections Mordialloc conducts comprehensive new home construction stage inspections across Mordialloc and the City of Kingston. Kamran strongly recommends getting an independent inspection at four key stages of your new build: Pre-Slab, Frame, Lockup (Pre-Plaster), and Completion (PCI/Handover). The Pre-Slab inspection ensures the builder has laid foundations according to the approved engineer's design and the Building Code of Australia prior to pouring concrete. The Frame stage inspection occurs after the building surveyor's approval, with Kamran conducting a highly detailed check for exposed steel, concrete cracking or dusting, level slabs, compliant wall frames, correct bracing, and proper roof truss installation. The Lockup stage inspection takes place once windows and exterior doors are installed, allowing for internal appliances and fixtures to be fitted safely. Each stage inspection takes between 1-3 hours depending on the property size and is carried out in accordance with AS4349.1-2007 and the Victoria Building Act. You will receive a detailed digital PDF report with high-resolution colour photographs within 24 hours, enabling you to communicate factually with your builder and ensure all work meets Australian Standards.