InspectorFind.com.au

InspectorFind.com.au

Open menu

Find Trusted Inspectors in Adelaide

Search

Construction stage inspections in Adelaide

Ensure your Adelaide construction project meets all critical structural milestones with independent quality assessments. We inspect the site at the slab, frame, and lock-up stages to verify that the workmanship aligns with strict South Australian building regulations.

Inspection type

Arrival time

New Build Stage Inspections

Get Quote
Est. arrival time: Within 24 hours
24-Hour Report TurnaroundRepair Cost Estimates
Keep your construction project on track with our expert New Build Stage Inspections at every critical phase of the build. Our qualified and insured inspectors identify structural issues, workmanship defects, and plan compliance, providing a clear, detailed report so you can resolve problems with your builder before they escalate. These inspections give you peace of mind and greater control throughout the entire construction process. We inspect to Australian Standard AS4349.0-2007, thoroughly examining all hard-to-access areas. When assessing the site, our inspectors employ advanced technology, including laser levels along with thermal and moisture devices, for a comprehensive investigation. This ensures that no potential problem goes unnoticed, providing you with detailed and accurate information. If our inspection uncovers any issues, we provide practical advice and recommendations for the necessary repairs or remedial work. Our advanced reporting software makes our industry-leading reports simple to read and navigate, featuring high-quality photos and videos. We provide a full consultancy service and strive to deliver your report via email and SMS on the same day the inspection is completed. Backed by a 100% money-back satisfaction guarantee, a price match guarantee, and over 30,000 completed inspections, Leading Building Inspections is your trusted partner for new build quality assurance.

Leading Building Inspections

5.0

New Build Stage Inspections

Get Quote
House Inspect Australia offers new build stage inspections to ensure the quality of construction work undertaken is not being compromised or defective. Preferred by homeowners and trusted by builders, our qualified and dedicated team is at the ready to assist you. Leveraging decades of years in the building industry, we provide quality services to our clients to safeguard your investment. Our mission is to provide qualified and quality services, helping people realise their dream of home ownership while ensuring that new constructions meet the expected standards without compromise.

Building and Pest Inspection | House Inspect Australia

5.0

4 x Stage Building Inspections

Get Quote
Est. arrival time: Flexible (1-2 weeks+)
24-Hour Report Turnaround
For clients building a new home with a registered builder or acting as an owner-builder, we offer comprehensive 4 x Stage Building Inspections throughout the entire construction process. We systematically assess critical phases of the build, including the initial concrete slab, the wall and roof frames, exterior cladding, wet area waterproofing, and the final interior fit-out. This ensures that everything meets strict quality standards and building regulations at every phase of construction. Having an independent expert monitor your build provides invaluable peace of mind. These stage inspections are conducted by Carlo Macri, a licensed builder (BLD212069) with over 25 years of hands-on experience in civil, commercial, and residential construction. Carlo's extensive background on the tools—including bricklaying, tiling, and concreting—gives him an unmatched understanding of proper building processes and structural integrity. He can easily identify substandard work or quick fixes before they are covered up by subsequent construction phases. After each stage inspection, you will receive a detailed digital photographic report, generally within 24 hours, highlighting any defects or areas requiring remedial work by your contractor. Our proactive approach empowers you to hold builders accountable, ensuring your new property is constructed safely and correctly across the Adelaide region.

Rescue Building Inspectors & Services

5.0

Staged Building Inspections

Get Quote
24-Hour Report Turnaround
Building a new home is a significant investment, and our Staged Building Inspections are designed to give you peace of mind throughout the entire construction process. The Staged Inspection programme consists of 5 separate stage inspections: Base Stage, Frame Stage, Lock-up Stage, Pre-painting Stage, and Building handover or practical completion. This is followed by an optional stage 6 inspection: Building warranty inspection. Our inspectors are highly trained and committed to staying at the top of the industry through continued education and training. Backed by 20 years of experience, they know exactly how buildings go together and how they can fall apart. We have developed our own custom-built inspection report that is completed on-site via an iPad, so you can be assured that it incorporates all the essential elements and photos needed for a thorough inspection. We use advanced reporting software and quality tools, including the latest thermal imaging cameras with inbuilt moisture meters, to ensure no detail is missed. You will receive your detailed report on the same day as the inspection. Our inspectors are always happy to explain their findings and answer your questions so you can make an informed decision about your construction project. We offer a 100% money-back guarantee and are fully covered by $1m professional indemnity and $5m public liability insurance.

Leading Building & Pest Inspections Fulham Gardens

5.0

Staged Building Inspections

Get Quote
Staged building inspections are independent checks carried out during construction, separate from the builder’s own supervision. Building a new home is stressful enough without wondering what your builder has missed, which is why we provide another set of experienced eyes at key milestones so defects are picked up while they are easier and cheaper to fix. We attend the site at agreed stages, compare the work against plans, basic NCC, and Australian Standards requirements, and look for workmanship issues that might lead to movement, water leaks, or premature failure. Typical stages include slab or footing inspection, frame inspection, pre-lining or lock-up inspection, waterproofing, wet area checks, and a practical completion inspection (PCI). At each visit, the focus is on structure, framing details, bracing, fixings, flashing, falls, waterproofing, general workmanship, and obvious safety issues. Our advanced assessments include checking complex roof structures with drone technology, precision checks for frame alignment using digital levels, reviewing roof space insulation and ducting installations, comprehensive timber roof truss framing inspections, and checking crucial box gutters and drainage points. Leveraging a strong construction background and extensive time spent on active building sites across Adelaide, we understand how volume builders operate and common shortcuts to watch for. You receive written feedback highlighting defects and incomplete work with clear photos and comments that you can share with your supervisor or builder, ensuring issues are addressed before the next stage starts. Our goal is to support you to get the home you paid for, ensuring quality assurance throughout your build process.

Insight Property Inspections PTY LTD.

5.0

Staged Construction Inspection

Get Quote
Est. arrival time: Flexible (1-2 weeks+)
24-Hour Report Turnaround
HomeMasters provides independent staged building inspections for new home builds in Adelaide, ensuring that construction complies with relevant Australian Standards and building codes. This service keeps builders fully accountable before any stage payments are made and helps identify minor issues before they develop into costly problems later in the build. The inspections cover the four critical stages of construction. First is the Footing Inspection, which checks positioning, reinforcements, formwork, and termite protection around pipe penetrations before the slab is poured. Second is the Slab, Wall, and Roof Framing Inspection, where inspectors check framing layouts, truss layouts, strapping, and bracing to ensure the durability of wall frames and roof structures. All timber framing is checked for full compliance with AS1684, including verifying that walls are straight and do not overhang the concrete slab. Third is the Wet Area Inspection, ensuring internal wet areas and balconies are suitably waterproofed with correct run-off gradients, compliant with AS3740 and AS4654. Finally, the Completion Inspection is a thorough final check before handover, covering paint finishes, sanitary installations, cabinetry, floor coverings, tiling, grouting, cornices, ceilings, architraves, and skirtings. Buyers receive a comprehensive report at the end of each stage, and inspectors will communicate directly with the builder regarding any defects or non-compliance issues found.

HomeMasters Building and Pest Inspections

5.0

Staged Building Inspections

Get Quote
Est. arrival time: Within 24 hours
24-Hour Report TurnaroundRepair Cost Estimates
Beyond Built Inspections thoroughly inspects new homes at any or all stages of construction to ensure your build meets or exceeds all relevant Australian Standards, the Building Code of Australia, and best trade practices. Often, construction supervisors are not registered builders, making independent oversight vital. Our team of fully qualified, licensed builders carefully assesses the 'bones' of the building, ensuring a sound structure before the installation of plaster linings, services, roof sealing, and the cleaning of wall cavities. We systematically check approved structural documentation onsite to ensure the home is built exactly as certified. The service offers comprehensive staged inspections including: Footings (inspected by an engineer), Wall and Roof Frame, Brick Work and Roof Cover, 2nd Fix or Lock Up, and Handover/Practical Completion (with additional inspections available for double-storey homes). We also offer optional post-building inspections for the 90-Day Maintenance Warranty Period and the Five-Year Statutory Warranty Period. This crucial independent oversight protects clients from poor workmanship that an untrained eye would miss, such as inadequate roof tie-down straps or poor brickwork bonding and tying. By detecting these defects early, we ensure your builder delivers a compliant, structurally sound home, saving you from future stress and costly structural failures.

Beyond Built Inspections

5.0

Slab Inspections

Fixed $480inc. GST
24-Hour Report Turnaround
The slab inspection is a critical foundation stage of your build and one of the four essential stages for ensuring the structural integrity of your home. While the trenching and steel fixing are assessed and certified by the consulting engineer who designed your home as a statutory requirement, structural issues can still arise during the next phases, affecting your home's long-term stability. Crucially, the consulting engineer is not required to oversee the concrete pouring process. Without professional oversight, this can lead to incorrect concrete strength, delays causing cold joints (weakened layers of partially cured concrete), or even entry points for termites. Our post-pour stage inspections ensure quality and compliance by meticulously assessing slab levels, structural dimensions, and identifying cold joints to address potential weaknesses before they become major problems. Based in the Adelaide southern suburbs, Stewart Building Consultants prioritises getting this right the first time. All inspections are conducted by Paul, a fully insured and licensed builder and supervisor with over 40 years of experience in the building industry. We provide peace of mind by ensuring your home's foundation meets the highest standards, delivering accurate, factual, and highly detailed reports within 24 hours.

Stewart Building Consultants

5.0

Wall and Roof Framing Inspections

Fixed $480inc. GST
24-Hour Report Turnaround
It is no longer compulsory for your builder to submit a completed Regulations 74 Supervisor Checklist for wall and roof framing to the council. Today, your builder only needs to notify the council that they deem the framing stage completed. With council performance quotas indicating that possibly only 60% of all developments are actually checked, it is absolutely essential to ensure your framing is thoroughly and independently inspected. Stewart Building Consultants provides this vital independent assessment to guarantee your wall and roof framing meets all necessary industry standards and compliance requirements. Conducted by Paul, a fully licensed and insured builder with over 40 years of experience as a Project Manager, Supervisor, and Construction Manager, our inspections offer unmatched attention to detail. We act as your trusted partner, looking after your best interests and protecting your asset through sound advice. Following the inspection, you will receive an accurate, factual, and highly detailed report—complete with photographic evidence—within 24 hours. By securing an independent wall and roof framing inspection, you gain the peace of mind that the structural framework of your new home has been rigorously evaluated by an industry expert before the build progresses any further.

Stewart Building Consultants

5.0

Waterproofing Inspections

Fixed $480inc. GST
24-Hour Report Turnaround
Our waterproofing inspection is a crucial penultimate stage assessment designed to evaluate the effectiveness of preventative measures against water damage in your new structure. A common industry pitfall is that a waterproofing certificate is only valid until the next trade comes along and disturbs the membrane; once disturbed, your warranty becomes void. The most cost-effective way to control this issue is for your tiler to employ the waterproofer and issue the certificate under their name, ensuring the tiler holds ultimate responsibility should an issue arise in the future. To protect your investment, Stewart Building Consultants will meticulously inspect the wet area waterproofing membrane before any tiling commences to ensure it is strictly Waterproofing Code compliant. All inspections are carried out by Paul, a fully licensed and insured builder with over 40 years of construction industry experience. We provide exceptional, reliable service with a high attention to detail. Following our assessment, you will receive a prompt, accurate, and factual report within 24 hours. This comprehensive report will feature clear photographic evidence to accompany our professional recommendations, giving you complete peace of mind that your home's wet areas are properly sealed and protected against costly future water damage.

Stewart Building Consultants

5.0

Stage Building Inspection

From $300+ GST
A multi levelled inspection on important stages of house construction. Focusing on structural integrity, bracing units, roof stability, waterproofing, drainage and building code compliance.

Direct Home Inspections

5.0

Staged New Build Inspections

From $525+ GST
Architectural drawings, Engineering drawings & specifications can be confusing. Take the headaches out of building a new home. New Building Staged Inspection compares the work at each stage of the build with the design and engineering plans. Completing inspections during each stage of construction allows issues and defects to be identified and rectified before it’s too late in the build, saving costs and keeping projects on track.

SA Residential Building Inspections

5.0

New Build Staged Inspection

Get Quote
Building a new home can be a very stressful time for anyone. BIA’s New Build Staged Inspections are there to protect you and are designed to ensure a new build or renovation is proceeding in accordance with Australian Standards, including the main stages where inspection is absolutely imperative to ensure your new home is being built correctly.

Building Inspectors Adelaide

4.8

During Construction

Get Quote
Inspections are prepared for clients who are building new homes or commercial buildings: Carried out at strategic stages of construction. To determine if the work has been carried out properly, in accordance with the Building Code and the agreed documentation. They include the hand over inspection. Inspections can be conducted at the end of the builder's maintenance liability period.

C&W Building Services Pty Ltd Building Inspectors

3.8

Popular inspections in Adelaide

Building and pest inspections in AdelaideBuilding inspections in AdelaidePest and termite inspections in AdelaideApartment inspections in AdelaideNew home handover inspections in AdelaideConstruction stage inspections in AdelaidePre-sale vendor inspections in AdelaidePool and spa safety inspections in AdelaideDilapidation reports in AdelaideAsbestos audits in Adelaide